Dr. A. K. M. Monjur Morshed

Department of Mechanical Engineering, BUET

Publications & Presentations

2024

  1. Akib Khan, and A.K.M. M Morshed,“Coalescence Behavior of Fully Submerged CO2 Nanobubbles: A Molecular Dynamics Based Parametric Study” Molecular Liquids , (impact factor: 6.633).(Click)
  2. EH Shopnil, MN Azad, J Emon, AKMM Morshed, “Jumping behavior of water nanodroplets on a superhydrophobic surface in high Ohnesorge number (Oh) regime” Computers & Fluids (impact factor: 2.5) .(Click)
  3. Md Asaduzzaman Sourov, Amitav Tikadar, Titan C Paul, AKM M Morshed, “The Effect Of Interconnected Microchannels On Chip Cooling Via Flow Boiling Of Water” 9th Thermal and Fluids Engineering Conference (TFEC), April, 21-24, 2024, Corvallis, OR, USA. .(Click)

2023

  1. AKMM Morshed, P Das, ZAR Bhuiyan, “Effect of surface wettability on specific heat capacity of nano-confined liquid” Molecular Liquids , (impact factor: 6.633).(Click)
  2. MA Khan, AKMM Morshed, TC Paul, “A machine learning-oriented pseudo-field approach to accelerate runtime of molecular dynamics simulation of liquids” Molecular Simulation (impact factor: 2.1) .(Click)
  3. AKM Morshed, AA Shuvo, MO Bappy, A Tikadar, TC Paul, “Investigation Of Fluid Flow And Heat Transfer Characteristics In Wavy Mini-Channel Heat Sink With Interconnectors” ASME Journal of Heat and Mass Transfer (impact factor: 2.1) .(Click)
  4. Yamin Mansur, Md Ahosan Habib, Titan C Paul, AKM M Morshed, “Comparative Analysis of Thermal and Hydraulic Performance of a Mini-Channel Heat Sink With Supercritical Carbon Dioxide and Water Coolants” ASME International Mechanical Engineering Congress and Exposition, October 29-November 2, 2023, New Orleans, Louisiana. .(Click)
  5. Masuda Afroj Lily, Tanvir Ahmed Refat, Tanvirul Abedien, AKM Monjur Morshed, Titan C Paul, “performance analysis of a packed bed latent heat thermal energy storage with encapsulated silica as pcm: numerical investigation” ASTFE Digital Library, 8th Thermal and Fluids Engineering Conference, March, 26-29, 2023, College Park, MD, USA. .(Click)
  6. Nudrat Nawal, Md Rashed Nizam, Priom Das, A K M M Morshed, “Desalination Performance of Nano porous Mos2 Membrane on Different Salts of Saline Water: A Molecular Dynamics Study” arXiv preprint arXiv:2310.05729 .(Click)

2022

  1. MA Rahman, CL Karmaker, T Ahmed, MI Khan, AKM M Morshed, SM Ali, “Modelling the causes of boiler accidents: Implications for economic and social sustainability at the workplace” Heliyon , (impact factor: 3.4).(Click)
  2. Abdul Aziz Shuvo, Md Omarsany Bappy, Amitav Tikadar, Titan C Paul, AKM Monjur Morshed, "Heat Transfer and Flow Characteristic of Sinusoidal Wavy Microchannel Heat Sink With Different Phase Shift", ASME International Mechanical Engineering Congress and Exposition .(Click)

2021

  1. Rakibul Hasan Roni and AKM M Morshed, "A Molecular Dynamics Study of the Effect of Nanoparticles Coating on Thermal Conductivity of Nanofluids Micro and Nano Letters, (impact factor: 0.975).(Click)
  2. AM Arka, RH Mridha, R Shafqat, M Galib, AKM M Morshed,"Design and comparative parametric analysis using NSGA-II for multivariable constrained optimization of shell and tube heat exchangers", AIP Conference Proceedings 2324 (1), 050031 .(Click)
  3. AA Shuvo, AKMM Morshed, "Numerical Investigation of Pulsating Flow Characteristics of Fluid in a Rough Circular Microchannel", Proceedings of 16th Asian Congress of Fluid Mechanics pp 477-486 .(Click)
  4. MA Rahman, MB Tamam, MS Faruque, AKMM Morshed, "Thermal Transportation Behavior Prediction of Water Molecules by Different Rigid Water Models: A Molecular Dynamics Study", Proceedings of 16th Asian Congress of Fluid Mechanics pp 497-508 .(Click)

2020

  1. Sumit Saha, Abu Raj Md. Ruslan, AKM M Morshed & M. Hasanuzzaman, "Global prospects and challenges of latent heat thermal energy storage: a review" Clean Technologies and Environmental Policy , November, 2020 (impact factor: 2.599).(Click)
  2. Rifat Mahmud, AKM M. Morshed, Titan C. Paul,"Enhanced Specific Heat Capacity of Liquid Entrapped between Two Solid Walls Separated by a Nanogap", Processes .(Click)
  3. Muhammad Rubayat Bin Shahadat, AKM M. Morshed,"Explosive Boiling of Water on a Hot Copper Plate: A Molecular Dynamics Simulation Study", Advanced Engineering Forum, (Click)
  4. MA Rahman, MB Tamam, MS Faruque, AKMM Morshed, "Study of Mini Channel Heat Sink with Different Internal Configuration", MATEC Web of Conferences , September 2020.(Click)

2019

  1. AKM M. Morshed, Muhammad Rubayat Bin Shahadat, Md. Ferdous Alam, "Thermal Transportation From Nanoparticles Deposited Solid Surface", Journal of Mechanical Engineering , Volume ME 49, No. 2, June 2019.(Click)
  2. Rifat Mahmud, AKM M Morshed, Titan C Paul, "Atomistic simulation of size-dependent heat capacity of liquid in molecular scale confinement at different temperatures", Micro and Nano Letters , Januray 2019 (impact factor: 0.975).(Click)
  3. Amitav Tikadar, Saad K.Oudaha, Titan C.Paul, Azzam S Salman, AKM M Morshed, Jamil A.Khan, "Parametric study on thermal and hydraulic characteristics of inter-connected parallel and counter flow mini-channel heat sink", Applied Thermal Engineering, Januray 2019(Click)
  4. Abdul A. Shuvo, AKM M. Morshed, Md. Shariful A. Emon, Amitav Tikadar, Titan C. Paul, "Heat Transfer Characteristics of a Phase Change Material Fluid in Microchannel Under Pulsating Flow Condition", Summer Heat Transfer Conference, July 14-17, 2019, Hyatt Regency Bellevue, WA, USA(Click)
  5. Md. Rakibul Hasan Roni, AKM M Morshed, Amitav Tikadar, Titan C. Paul, Jamil Khan, "Nanoparticles Shape Effect on Thermal Conductivity of Nanofluids: A Molecular Dynamics Study", ASME 2019 International Mechanical Engineering Congress and Exposition, November 8-14, 2019, Salt Lake City, Utah, USA(Click)
  6. Muhammad Rubayat Bin Shahadat, AKM Monjur Morshed, Amitav Tikadar, Titan C. Paul, Jamil Khan, "Nano Sized Bubble Formation, Growth and Collapse in Liquid Water by Central Heating: A Molecular Dynamics Simulation", ASME 2019 International Mechanical Engineering Congress and Exposition, November 8-14, 2019, Salt Lake City, Utah, USA(Click)

2018

  1. Asma Ul Hosna Meem, Ongira Chowdhury, AKM M. Morshed, “Effects of Vacancy Defects Location on Thermal Conductivity of Silicon Nanowire: A Molecular Dynamics Study”,Micro and Nano Letters (impact factor: 0.975), DOI: 10.1049/mnl.2017.0910, Online ISSN 1750-0443, April 2018. (Impact Factor: 0.841).
  2. Ferdous Alam, Muhammad Rubayat Bin Shahadat, AKM M. Morshed, Titan C Paul “A Molecular Dynamic Study of Boiling on A Nano Dot Decorated Solid Surface”, 3rd Thermal and Fluids Engineering Conference (TFEC), March 4-7, 2018, Fort Lauderdale, FL, USA.
  3. Amitav Tikadar, Saad Oudah, Azzam Salman, AKM M. Morshed, Titan Paul, Jamil Khan, “Effect of Inter-connector on Thermo-hydraulic Characteristics of parallel and Counter Flow Mini-Channel”, ASME 2018 International Mechanical Engineering Congress and Exposition, November 9-15, 2018, Pittsburgh, PA, USA.
  4. Rifat Mahmud, AKM M. Morshed, “Atomistic Simulation of Temperature Dependent Heat Capacity of Nanogap Confined Liquid”, AIP Conference Proceedings (12th International Conference on Mechanical Engineering, Dhaka), Vol 1980, Issue 1, Pages 050024, July 2018.
  5. MRB Shahadat, AKM M. Morshed, “A Molecular Dynamics Study of Thermal Transportation of Graphene Sheet with Various Temperature”, AIP Conference Proceedings (12th International Conference on Mechanical Engineering, Dhaka), Vol 1980, Issue 1, Pages 050008, July 2018.
  6. G Rasul, MK Elias, AKM M. Morshed, “A Numerical Investigation of Heat Transfer Enhancement Techniques in Mini-Channel Heat Sink”, AIP Conference Proceedings (12th International Conference on Mechanical Engineering, Dhaka), Vol 1980, Issue 1, Pages 050007, July 2018.
  7. Md. Omarsany Bappy, Tahir Mahmud , Md. Ayub Ali, Raihan Aziz, AKM M Morshed, "Experimental Study of Condensation Behavior on a Vertical Micro-Grooved Copper Plate", 8th BSME International Conference on Thermal Engineering, Dhaka, 19-21 December, 2018.
  8. Arnab Mustafi Arka, Rafsun Hossain Mridha, Reaz Shafqat, Syed Angkan Haider, Faisal Haque, AKM M Morshed, "Design and Multivariable Constrained Optimization of Shell and Tube Heat Exchangers", 8th BSME International Conference on Thermal Engineering, Dhaka, 19-21 December, 2018.
  9. Sakil Hossen, Mahmud Or-Rashid, Saddam Hossen, Mantaka Taimullah, AKM M Morshed, "Effect of Filling Ratio and Adiabatic Length on Heat Pipe Heat Exchanger (HPHE)", 8th BSME International Conference on Thermal Engineering, Dhaka, 19-21 December, 2018.
  10. Faria Tasnim, Farhan Istiaque, Mohsan Uddin Ahmad, AKM M Morshed, "A CFD Investigation of Conventional Brick Kilns", 8th BSME International Conference on Thermal Engineering , Dhaka, 19-21 December, 2018.

2017

  1. Titan C Paul, AKM M. Morshed, Elise B Fox, Jamil A Khan, "Enhanced thermophysical properties of NEILs as heat transfer fluids for solar thermal applications", Applied Thermal Engineering, Volume 110, Pages 1-9, January 2017. (Impact Factor: 3.77).
  2. Mohammad. Nasim Hasan, S. M. Shavik, K. F. Rabbi, K.M. Mukut, AKM M. Morshed, “Phase Change Characteristics of ultra-thin liquid argon film over different flat substrates at High Wall Superheat for hydrophilic/hydrophobic wetting condition: A non-equilibrium molecular dynamics study”, Journal of Chemical Engineering, Volume 29, No. 1, 2017, Pages 49-55, 2017.
  3. Rifat Mahmud, AKM M Morshed, Titan C Paul, "Heat Capacity of Nanoconfined Liquid: A Molecular Dynamics Simulation", ASME 2017 International Mechanical Engineering Congress and Exposition, Volume-8, Pages: V008T10A073-V008T10A073, November 03-09, 2017, Tempa, Florida, USA.
  4. Muhammad Rubayat Bin Shahadat, Ahmed Shafkat Masnoon, Shafkat Ahmed, AKM M Morshed, "Effect of the orientation of doped nanoparticles on thermal transportation of a solid: A molecular dynamics study", AIP Conference Proceedings (7th International Conference on Thermal Engineering, Dhaka), Vol. 1851, issue 1, July 2017, page 020084.

2016

  1. Titan C Paul, AKM M Morshed, Elise B Fox, Jamil A Khan, "Enhanced Thermophysical Properties of NEILs as Heat Transfer Fluids for Solar Thermal Applications", Applied Thermal Engineering, September,2016 (Impact Factor: 3.77).
  2. SM Shavik, MN Hasan, AKM M Morshed, "Molecular Dynamics Study on Explosive Boiling of Thin Liquid Argon Film on Nanostructured Surface Under Different Wetting Conditions", Journal of Electronic Packaging , Volume 138, Issue 1, March 2016, Pages 010904-1-8 (Impact Factor: 2.21).
  3. Titan C Paul, AKM M Morshed, Jamil A Khan, "Numerical investigation of natural convection of nanoparticle enhanced ionic liquids (NEILs) in enclosure heated from below", AIP Conference Proceedings (11th International Conference on Mechanical Engineering (ICME 2015), volume 1754, issue 1, pages 050019-1-6, September, 2016.
  4. Md Mahamudul Hossain, Amitav Tikadar, Fazlul Bari, AKM M Morshed, "Enhanced heat sink with geometry induced wall-jet", AIP Conference Proceedings (11th International Conference on Mechanical Engineering (ICME 2015), volume 1754, issue 1, pages 040004, September, 2016.
  5. Ahmed Shafkat Masnoon, Ferdaushi Alam Bipasha, AKM M Morshed, "Reduced thermal conductivity of a nanoparticle decorated nanowire: A non-equilibrium molecular dynamics study", AIP Conference Proceedings (11th International Conference on Mechanical Engineering (ICME 2015), volume 1754, issue 1, pages 050024, September, 2016.
  6. Amitav Tikadar, Md Mahamudul Hossain, AKM M Morshed, "Numerical investigation of thermal performance of a water-cooled mini-channel heat sink for different chip arrangement", AIP Conference Proceedings (11th International Conference on Mechanical Engineering (ICME 2015), volume 1754, issue 1, pages 050007, September, 2016.
  7. Muhammad Rubayat Bin Shahadat, Shafkat Ahmed and AKM M Morshed, " A molecular dynamics study of thermal transport in nanoparticle doped Argon like solid", AIP Conference Proceedings (11th International Conference on Mechanical Engineering (ICME 2015), volume 1754, issue 1, pages 050021, September, 2016.

2015

  1. Titan C Paul, AKM M Morshed, Elise B Fox, Jamil A Khan, "Thermal Performance of Al2O3 Nanoparticle Enhanced Ionic Liquids (NEILs) for Concentrated Solar Power (CSP) Applications", International Journal of Heat and Mass Transfer, Volume 85, June 2015, Pages 585-594 (Impact Factor: 3.89).
  2. Titan C Paul, AKM M Morshed, Elise B Fox, Jamil A Khan, "Experimental investigation of natural convection heat transfer of Al2O3 Nanoparticle Enhanced Ionic Liquids (NEILs)", International Journal of Heat and Mass Transfer, Volume 83, April 2015, Pages 753-761 (Impact Factor: 3.89).
  3. Titan C Paul, AKM M Morshed, Elise B Fox, Jamil A Khan, "Experimental investigation of natural convection heat transfer of Al2O3 Nanoparticle Enhanced Ionic Liquids (NEILs)", International Journal of Heat and Mass Transfer, Volume 83, April 2015, Pages 753-761 (Impact Factor: 3.89).
  4. Umera Sarjana, M Zakir Hossain, AKM M Morshed, “Analysis of Heat Transfer in Channel Flow Subject to Sine-Bump Heating”, Procedia Engineering (6th BSME International Conference on Thermal Engineering, ICTE2014), Volume 105, December 2015, Pages 192-200.
  5. SM Shavik, Mohammad Nasim Hasan, AKM M Morshed, M Quamrul Islam, “Molecular Dynamics Study of Effect of Different Wetting Conditions on Evaporation and Rapid Boiling of Ultra–thin Argon Layer Over Platinum Surface”, Procedia Engineering (6th BSME International Conference on Thermal Engineering, ICTE 2014), Volume 105, December 2015, Pages 446-451.
  6. SM Shavik, Mohammad Nasim Hasan, AKM M Morshed, M Quamrul Islam, “Molecular Dynamics Study of Effect of Different Wetting Conditions on Evaporation and Rapid Boiling of Ultra–thin Argon Layer Over Platinum Surface”, Procedia Engineering (6th BSME International Conference on Thermal Engineering, ICTE 2014), Volume 105, December 2015, Pages 446-451.

2014

  1. Titan C Paul, AKM M Morshed, Elise B Fox, Ann E Visser, Nicholas J Bridges, Jamil A Khan, "Buoyancy Driven Heat Transfer Behavior of [C4 mim][NTf2] Ionic Liquid: An Experimental Study", Applied Thermal Engineering, Volume 66, Issue 1, May 2014, Pages 534-540. (Impact Factor: 3.77)
  2. Titan C Paul, AKM M Morshed, Elise B Fox, Ann E Visser, Nicholas J Bridges, Jamil A Khan, "Thermal Performance of Ionic Liquids for Solar Thermal Applications", Experimental Thermal and Fluid Science, Volume 59, November 2014, Pages 88-95(Impact Factor: 3.204).
  3. SM Shavik, Mohammad Nasim Hasan, AKM M Morshed, M Quamrul Islam, “Natural convection and entropy generation in a square inclined cavity with differentially heated vertical walls”, Procedia Engineering (10th International Conference on Mechanical Engineering, ICME 2013), Volume 90, December 2014, Pages 557-562.
  4. AKM M Morshed, AA Rezwan, Jamil A Khan, “Two-phase Convective Flow in Microchannel with Nanoporous Coating”, Procedia Engineering (10th International Conference on Mechanical Engineering, ICME 2013), Volume 90, December 2014, Pages 588-598.
  5. Titan C Paul, AKM M Morshed, Jamil A Khan, “Effect of Nanoparticle Dispersion on Thermophysical Properties of Ionic Liquids for its Potential Application in Solar Collector”, Procedia Engineering (10th International Conference on Mechanical Engineering, ICME 2013), Volume 90, December 2014, Pages 643-648.
  6. Jamil A Khan, AKM M Morshed, Ruixian Fang, “Towards Ultra-compact High Heat Flux Microchannel Heat Sink”, Procedia Engineering (10th International Conference on Mechanical Engineering, ICME 2013), Volume 90, December 2014, Pages 11-24

2013

  1. AKM M. Morshed, T C Paul, Jamil A. Khan, "Effect of Al2O3 Nanoparticle Deposition on Flow Boiling Performance of Water in a Microchannel", Experimental Thermal and Fluid Science , Volume 47, May 2013, Pages 6-13(Impact Factor: 3.204).
  2. AKM M. Morshed, T C Paul, Jamil A. Khan, "Effect of Cu–Al2O3 Nanocomposite Coating on Flow Boiling Performance of a Microchannel", Applied Thermal Engineering, Volume 51, Issue 1, March 2013, Pages 1135-1143 (Impact Factor: 3.77).
  3. AKM M. Morshed, T C Paul, Jamil A. Khan, " Atomistic Simulation of Temperature Dependent Thermal Transport Across Nanoconfined Liquid", Physica E: Low-dimensional Systems and Nanostructures, Volume 47, January 2013, Pages 246-251(Impact Factor: 2.33).
  4. Titan C Paul, AKM M Morshed, Jamil A Khan, “Nanoparticle enhanced ionic liquids (NEILS) as working fluid for the next generation solar collector”, Procedia Engineering (5th BSME International Conference on Thermal Engineering), Volume 90, December 2013, Pages 631-636.
  5. Titan C Paul, AKM M Morshed, Elise B Fox, Ann E Visser, Nicholas J Bridges, Jamil A Khan, “Numerical Investigation of Natural and Forced Convection of Ionic Liquids”, ASME 2013 International Mechanical Engineering Congress and Exposition, November 15-21, 2013, San Diego, California, USA.
  6. Titan C Paul, AKM M Morshed, Elise B Fox, Ann E Visser, Nicholas J Bridges, Jamil A Khan, “Natural Convection of Heat Transfer Fluid (Therminol VP-1) in Square Cavity Heated from Below”, ASME 2013 Heat Transfer Summer Conference, July 14-19, 2013, Minneapolis, MN, USA.
  7. Titan C Paul, AKM M Morshed, Dale A McCants, Jamil A Khan, “Buoyancy Driven Heat Transfer Behavior of Zinc Oxide (ZnO)–Water Nanofluids”, ASME 2013 Heat Transfer Summer Conference, July 14-19, 2013, Minneapolis, MN, USA.
  8. Titan C Paul, AKM M Morshed, Elise B Fox, Ann E Visser, Nicholas J Bridges, Jamil A Khan, “Enhanced Thermal Performance of Ionic Liquid-Al2O3 Nanofluid as Heat Transfer Fluid for Solar Collector”, ASME 2013 7th International Conference on Energy Sustainability, July 14-19, 2013, Minneapolis, MN, USA.

2012

  1. AKM M. Morshed, Fanghao Yong, Yakut Ali, Jamil A. Khan, Chen Li, “Enhanced Flow Boiling in a Micro Channel With Integration of Nanowires”, Applied Thermal Engineering, Volume 32, January 2012, Pages 68-75(Impact Factor: 3.77).
  2. AKM M. Morshed, T C Paul, Jamil A. Khan, “ Effect of Nanostructures on Evaporation and Explosive Boiling of Thin Liquid Films: A Molecular Dynamics Study” Applied Physics A, Volume 105, Issue 2, November 2011, Pages 445-451.
  3. Titan C Paul, AKM M Morshed, Elise B Fox, Ann E Visser, Nicholas J Bridges, Jamil A Khan, “Natural Convection in Rectangular Cavity with Nanoparticle Enhanced Ionic Liquids (NEILs)”, ASME 2012 International Mechanical Engineering Congress and Exposition, November 9-15, 2012, Houston, Texas, USA.
  4. AKM M Morshed, Titan C Paul, Jamil A Khan, “Effect of cross groove on flow boiling in a microgap”, ASME 2012 Heat Transfer Summer Conference, July 8-12, 2012, Puerto Rico, USA.
  5. AKM M Morshed, Titan C Paul, Ruixian Fang, Jamil A Khan, “Flow Boiling Characteristics of Dilute Emulsion in Microchannel”, ASME 2012 International Mechanical Engineering Congress and Exposition, November 9-15, 2012, Houston, Texas, USA.

2011

  1. AKM M. Morshed, T C Paul, Jamil A. Khan, “ Effect of Nanostructures on Evaporation and Explosive Boiling of Thin Liquid Films: A Molecular Dynamics Study” Applied Physics A, Volume 105, Issue 2, November 2011, Pages 445-451 (Impact Factor: 1.60).
  2. Titan C Paul, AKM M Morshed, Elise B Fox, Ann E Visser, Nicholas J Bridges, Jamil A Khan, “Experimental investigation of natural convection heat transfer of an ionic liquid in a rectangular enclosure heated from below”, ASME 2011 International Mechanical Engineering Congress and Exposition, November 11-17, 2011, Denver, Colarado, USA.

2010

  1. AKM M Morshed, Jamil A Khan, “Numericl Analysis of Single Phase Multi Layered Microchannel Heat Sink with Inter-Connects Between Vertical Channel”, International Heat Transfer Conference, IHTC14, August 8-13, 2010, Washington DC, USA.